产品分类结果页

SAFEFAST ELITE CLASS I

The SafeFAST Elite Class I is designed and manufactured to meet the requirements of the European standard EN 12469: 2000.

The microbiological safety workbenches have been adapted worldwide for the highest level of personal protection. They are used specifically for handling dangerous substances that can be potentially dangerous for humans or animals. The air sucked in through the work opening is filtered through a G3 pre-filter behind the rear wall and an H14 HEPA filter before it is released into the ambient air.

넶25 ¥ 0.00

SAFEFAST ELITE CLASS III

The microbiological safety cabinets are designed and manufactured to meet the requirements of the European standard EN 12469:2000. The SafeFAST Elite Class III are fully enclosed safety cabinets designed for product, personnel and environmental protection. As such, they are specifically used when handling hazardous substances that can be potentially dangerous to humans or animals.

Both the transfer flap and the working chamber operate in negative pressure mode, with the exhausted air vented through a system of double H 14 HEPA filters. The working chamber has an ISO 3 class laminar flow, which prevents cross-contamination of the product.

넶12 ¥ 0.00

FLOWFAST H

The FlowFAST H product protection bench functions according to the principle of horizontal laminar air flow.

For an ergonomic sitting posture, the usable space is completely open to the front. This allows a large range of movement within the product protection workbench.

넶11 ¥ 0.00

FLOWFAST H REVERSE FLOW

With the FlowFAST H Reverse Flow, the air is completely drawn in from the ambient air and, after being filtered by an H14 HEPA filter, is released into the ambient air. It thus offers operators protection from hazardous powders or strong pharmaceutical compositions. The aerodynamically carefully designed unit reduces airflow turbulence for maximum containment, while minimizing the impact that drafts can have on sensitive balances. The design of the system exceeds the containment requirements of ANSI/ASHRAE 110, as confirmed by independent type testing.

넶8 ¥ 0.00

FLOWFAST IVF

FlowFAST IVF workbench is constructed especially for use in fertilization laboratories for research in human and animal reproduction.

넶23 ¥ 0.00

CHEMFAST PREMIUM

The economical ChemFAST Premium reduces the overall energy consumption of a laboratory by up to 80% compared to conventional chemical fume hoods.

넶5 ¥ 0.00

CHEMFAST SHARP

The ChemFAST Sharp is a chemical fume hood from FASTER, which is suitable for connection to an exhaust system and complies with EN IS0 14175 3-6. The air flow is based on the principle of variable air-flow, where the supply air speed is automatically regulated depending on the front window opening.
Optimized energy consumption and reduced CO2 emissions are possible thanks to a modern microprossecor control system.

넶10 ¥ 0.00

CHEMFAST CLASSIC

The ChemFAST Classic is a chemical fume hood suitable for connection to an exhaust air system and complies with EN IS0 14175 1-3. The fume hood is based on the principle of constant air flow.

넶8 ¥ 0.00

CHEMFAST ELITE / TOP

The ChemFAST Elite / Top complies with the EN ISO 14175-3 standard and offers the highest level of personal protection against hazardous gases, vapors, dusts, aerosols, and the like. These are immediately extracted from the air via a ventilation system with a suitable filter and the user is reliably protected from substances that are harmful to health.

넶4 ¥ 0.00

CHEMFAST ARCHIVE

The ChemFAST Archive complies with the EN ISO 14175-3 standard and offers the highest level of personal protection against hazardous fungal and mould spores, dusts as well as vapours and other hazardous substances. These are immediately extracted from the air via a ventilation system with a suitable filter, reliably protecting the user from harmful substances.

넶9 ¥ 0.00